High Voltage modules
HPR97A
|
|
Zero Crossing Reversible High Voltage modules |
REF/
HPR97A |
|
HP2.5RZC, HP3RZC, HP5RZC & HP8RZC |
|
|
|
|
UNIT TYPE |
OUTPUT |
RIPPLE AT |
OUTPUT DEAD SPACE (output voltage undefined) |
| HP2.5RZC | -2.5 kV to +2.5 kV at 400µA | 250 mV peak to peak | -100 mV to +100 mV |
| HP3RZC | -3 kV to +3 kV at 400µA | 250 mV peak to peak | -100 mV to +100 mV |
| HP5RZC | -5 kV to +5 kV at 400µA | 500 mV peak to peak | -350 mV to +350 mV |
| HP8RZC | -8 kV to +8 kV at 400µA | 1 V peak to peak | -500 mV to +500 mV |
pin connections & instructions
| Electrical Specification | |
| Input voltages: | +24 V +10% at 1 A and -15 V +5% at 25 mA. |
| Output voltage: | See table above. |
| Control voltage: |
-10 V to +10 V give -max. kV
to +max. kV
(e.g. -2.5 kV to +2.5 kV). NB: internal manual potentiometer control not fitted. |
| Load regulation: | Less than 100 ppm for zero to max. load. |
| Line regulation: | Less than 20 ppm for 1 V change in I/P volts. |
| I monitor: | 0 to +10 V represents 0 to +500 µA, 0 to -10 V represents 0 to -500 µA. |
| Speed of response: | Better than 10 mS measured on a 5 kV peak wave between 10% & 90%. |
| Temperature co-efficient: | 25 ppm per °C. |
| Operating temperature: | 0 C to +45 °C. |
|
Mechanical Specification |
|
| Size: |
216mm x 155mm x 52mm.
NB. Grounding of the case is via fixing bolts. |
| Output cable: | URM43 length 0.5 meter. |
| Input Connector: | BERG 20 Way IDC header, mating connector and 300 mm of ribbon cable supplied. |
|
|
Applied Kilovolts Ltd.
webSite: http://www.appliedkilovolts.com/ |
|
|
38 - 40 Eastbrook Road, Portslade, Sussex, BN41 1PB, United Kingdom Phone: +44 (0) 1273 439 440 Fax: +44 (0) 1273 439 449 |
||
Local distributor in Japan
|
|
APACE Science, Inc.
webSite:
http://www.apace-science.com/ Mitomo-Bldg.#2 - 6F, Ebisu-nishi 2-Chome, 2 - 8, Shibuya-Ku, Tokyo 150-0021 Phone: +81 (0)3 - 3463 - 3204 Fax: +81 (0)3 - 3463 - 3205 |
| | Top of Page | specials | Detailed Photo | APACE Science Home | |
