distributor in Japan
|
|
eMorpho is the
smallest, fastest, USB-powered single-card
MCA currently on the market.
At only 2-inch diameter, and a very
competitive price, the eMorpho is an ideal solution
for standalone and embedded applications.
The device is entirely
controlled and powered through its USB port.
Using real time digital signal processing
the eMorpho achieves unrivaled processing speed, up to
16 Mcps, and can accommodate any known
scintillator.
Beyond spectroscopy, the eMorpho offers built-in
extended functionality such as waveform capture for
diagnostics, real time pulse shape analysis for phoswich
detectors and list mode data acquisition for monitoring
systems. 13 general purpose I/O lines support
daisy-chaining of clocks, triggers and data
for use in detector arrays such as radiation portal monitors.
|
|
MCA:
|
4096ch x 32 bit
max rate is 16.5Mcps
|
|
Interface:
|
USB 1.1 for data and power
(0.11 A .... 0.22 A)
|
Extended
functionality:
|
Waveform capture
Phoswich support
List mode data
|
|
Extendable:
|
13 GPIO lines
2 clock I/O lines
|
|
|
TwinBase product line
introduces the next generation of advanced embedded
power bases.
TwinBase pairs up a high voltage
generator with a very low power transistorized high voltage
divider to energize the photomultiplier dynodes.
This ensures a perfect match between these crucial
components creating the best possible system
performance.
TwinBase provides exceptional
linearity and gain stability while
drastically cutting power consumption.
TwinBase is the ideal solution for
battery-operated systems that have to perform reliably and
with accuracy under high-count rate conditions.
Using the TwinBase eliminates the need for
external high voltage supplies and high voltage cables.
This reduces system complexity, improves reliability,
ruggedness and safety.
|
|
HV:
|
500 V to 2,000 V
Transistorized high voltage divider
|
|
Control:
|
Analog, digital, eMorpho
|
|
Power:
|
1.8 V to 16 V
70 .. 150 mW at 1,000 V
Standby: 0.1 mA
|
Very
linear:
|
Gain drift < 1% at 50ľA PMT anode
DC-current
|
|
Convenient:
|
Eliminates external HV-supply and cables
|
|
|
R2D nuclear radiation
detector utilizes a matched scintillation
crystal and photomultiplier combination, powered by a
TwinBase and read out by an eMorpho
digital MCA.
The R2D detectors use a single USB interface
for both, data and power.
All components have been selected and designed to
optimize system performance.
R2D delivers stable and precise
high-speed spectroscopy even in intense radiation
environments, reducing operating costs
associated with measurement time.
The detectors are delivered with calibration data and a unique
identifier stored in non-volatile memory.
As there are no manual adjustments necessary, sensors can be
deployed by minimally trained personnel.
R2D detectors are sold with a variety of
crystals, such as NaI(Tl) and CsI(Na), suitable to different
application.
All detectors are fully characterized at the
factory and carry a performance guarantee.
Detectors have built-in support for array applications,
such as radiation portal monitors. The combination of these
features makes the R2D an outstanding
solution for a wide range of applications.
|
|
Components:
|
Detector core and housing
Embedded power base
Embedded eMorpho MCA
|
|
Performance:
|
Designed for spectroscopy
NaI(Tl) for low cost and high speed
CsI(Na) for highest stopping power
Inquire about LaCl3 and LaBr3
|
|
|
