ion gun / ion source kit parts list
|
|
COLUTRON Research ion gun / ion source kit parts list |
represented by
|
| Ion Source Assembly ( flange type should be specified ): |
| model 100-O | ion source assembly, with oven |
| model 100 | ion source assembly, without oven |
| model 100-Q | quartz ion source assembly |
| Heat Sink: |
| model 103 | non-bakeable, O-ring grooves on both flange sides |
| model 103-B | bakeable, conflats on both flange sides |
| Lens System: |
| model 200-B | bakeable, incl. vert. & horiz. beam deflectors |
| Velocity Filter (velocity filter includes vert. / horiz. deflectors): |
| model 600 | non-bakeable, 6 inch length, mass res. = ~ 400 |
| model 600-B | bakeable, 6 inch length, mass res. = ~ 400 |
| model 600-B-CT | replacement pair of coils for model 600-B |
| model GR-3-6 | velocity filter guard ring control unit box |
| model 300-H | non-bakeable, #300 filter in vacuum housing, with GR-3-6 |
| model 600-H | non-bakeable, #600 filter in vacuum housing, with GR-3-6 |
| model 600-B-H | bakeable, #600-B filter in vacuum housing, with GR-3-6 |
| Decelerator: |
| model 400 | bakeable, lens system in housing, both conflat flanges |
| model 400-L | bakeable, lens system only |
| model 400-A | adapter flange for G-1, G-2 or G-3 |
| Quadrupole deflector (1eV ~ 10keV): |
| model 900 | electrostatic quadrupole deflector, without housing |
| model 900-H | electrostatic quadrupole deflector, with vacuum housing |
| Insulator: |
| model 500 | bakeable, both flanges conflat, for Kit or Gun |
| Ion Beam Kit: |
| model BK-3 | non-bakeable, incl. 100-Q, 103, 200-B, 300, GR-3-6 |
| model BK-6 | non-bakeable, incl. 100-Q, 103, 200-B, 600, GR-3-6 |
| model BK-6-B | bakeable, incl. 100-Q, 103-B, 200-B, 600-B, GR-3-6 |
| Low energy ion Gun Systems: |
| model G-1 |
non-bakeable system in a vacuum housing and including
models 100-Q, 103-B, 500, 200-B, 600 & GR-3-6 |
| model G-2 |
bakeable system in a vacuum housing and including
models 100-Q, 103-B, 500, 200-B, 600-B & GR-3-6) |
| model G-3 |
bakeable system in a vacuum housing and including
models 100-Q, 103-B, 500 & 200-B |
| model G-1-D |
non-bakeable system in a vacuum housing and including
models 100-Q, 103-B, 500, 200-B, 600, 400, 400A & GR-3-6 |
| model G-2-D |
bakeable system in a vacuum housing and including
models 100-Q, 103-B, 500, 200-B, 600-B, 400, 400A & GR-3-6 |
| Ion gun Controls: | ||
| model IT-10-1 | isolation transformer, 10kV - 1kVA, 115-220V.ac/115V.ac | |
| model E-1 | Control unit for Ion Gun model G-1 | |
| model E-1-D | Control unit for Ion Gun model G-1-D | |
| model E-2 | Control unit for Ion Gun model G-2 | |
| model E-2-D | Control unit for Ion Gun model G-2-D with CU-1 | |
| model CU-1 |
Cooling unit for ion source & Velocity Filter Magnet
HFC-134a coolant gas excluded |
| model PCU-3 opt.4 | dc High voltage power supply, 100V ~ 10kV @0.5mA x 4ch. |
| model PCU-3 opt.6 |
dc High voltage power supply, 100V ~ 10kV @0.5mA x 6ch.
|
| ion source assembly / spare parts: |
| 101 | ion Source model 101 (with Contact pins, gas inlet tube, no oven) |
| 101-O | ion Source model 101-O (with contact pins, gas inlet tube, oven) |
| 101-Q | ion Source model 101-Q (All Quartz, replaces model 101) |
| 102-S | ion Source Receptacle (smooth face) |
| 102-C | ion Source Receptacle (2-3/4 inch Conflat groove on face) |
| 102-O | ion Source Receptacle (O-Ring groove on face) |
| 108-Q | Ceramic mounting base for Quartz Ion Source model 101-Q |
| 109 | Boron Nitride Ion Source Chamber for model 101-O (with oven) |
| 110 | Boron Nitride Ion Source Chamber for model 101 (without oven) |
| 110-Q | Quartz Chamber for model 101-Q |
| 111 | Boron Nitride Ion Source Cap |
| 111-Q | Ceramic Ion Source Cap for model 101-Q |
| 112 | Boron Nitride Ion Source Insert Ring |
| 112-Q | Quartz Ion Source Insert Ring for model 101-Q |
| 113 | Anode |
| 114 | Anode Snap Ring |
| 115 | Filament ( 15 mil / 0.38mm ) ** note |
| 115-10 | 10 pcs. set of Filament ( 15 mil / 0.38mm ) ** note |
| 120 | Filament ( 20 mil / 0.51mm ) ** note |
| 120-10 | 10 pcs. set of Filament ( 20 mil / 0.51mm ) ** note |
| 125 | Oven |
| 126 | Oven Contact Wires (one pair) |
| 127 | Contact Wire (One, Anode or Filament for model 101 and 101-Q) |
| 127-Q | Contact Wire (One, Anode or Filament for model 101-Q) |
| 128 | Contact Pin for model 101 |
| 128-Q | Contact Pin for model 101-Q |
| 129 | Cap Snap Ring |
| 129-Q | Cap Clamp for model 101-Q |
| 130 | Gas inlet Tube for model 101 |
| 130-Q | Quartz Gas Tube with disk |
| 140 | Gas Tee (Stainless Steel) |
| 150 | Charge Holder (Stainless Steel) |
| 151 | Charge Holder (Quartz) |
| 152 | Charge Holder (Alumina) |
| 155-Q | Tungstene Spring for model 101-Q |
| | Page Top | Colutron ion Beam Products Page | Colutron ResearchTopPage | |
| | APACE Science TopPage | APACE Science Profile | APACE Science Products | |